Scanning Electron Microscopy (SEM)

Scanning Electron Microscopy (SEM) can produce images of almost any sample at magnifications of 15-300,000X. The SEM has tremendous depth of field allowing for imaging that cannot be accomplished using optical microscopy. Conductive and nonconductive samples can be imaged. When operated in the backscatter (BSE) detection mode, differences in material composition can be observed. Elemental analysis can be performed on any feature observed with an integrated Energy Dispersive Spectroscopy (EDS) detector.

Stainless steel particle found on MEMS device

Cracked polymer film on medical device

Solder joint

Clay Material Imaged by FESEM

Ceramic Membrane Imaged by FESEM

Optical Stack Imaged by FESEM

Disk Drive Head Imaged by FESEM

Request Services

Testimonials

"As always, it was delightful to do business with your company."

"Thank you for the excellent turnaround time on this report."

"I got the reports, it was exactly what we were looking for.Thanks for sending us the report so promptly."

"Thanks for the AES results. We think your AES work is excellent."

"Thank you very much for the quick turnaround."

"Thanks for the report and the conclusions are very good."

"Outstanding job with these reports guys!"

Get Our Newsletter

We focus on surface analysis and material characterization analysis by using Auger, ESCA, XPS, SIMS, FTIR, SEM, EDS, and AFM